NOTE: Different sizes of Cell Modules offered at our store are functionally identical and aren't rated for different cell capacities. The only difference between module sizes is diameter of the ring terminals and length of the lead wire. Select module size based on most appropriate fit to your cell's terminals, regardless of rated capacity. See table below for selection details.
MiniBMS Cell Module - this is individual cell module which installs on prismatic LiFePo4 cells.
Get one cell module for each cell or for each group of cells connected in parallel if your pack contains groups of smaller cells in series/parallel configuration. See Product Support page for details.
When ordering, select correct HVC voltage for your cell model. 3.8V is typically used on Thundersky/Winston/Sinopoly cells, while 3.6V is used on all others.
If you do not desire shunting functionality, simply clip off 5 Watt ceramic resistors from your cell modules prior to installing them.
Use this table to select most appropriate board size for your cells:
|Board Type||Price||Bolt Size||Ring Size||Max terminal spacing||Examples of cell models|
|$11.99||M6||1/4"||85 mm||HiPower 60 AH, CALB/TS 40-60 AH, GBS 40-100 AH|
|B||$12.25||M8||5/16"||115 mm||CALB/TS/Winston/Sinopoly 90-200 AH|
|C||$12.49||M10||3/8"||145 mm||HiPower 100AH, RealForce 80-220AH|
|D||$12.75||M12||1/2"||240 mm||TS/Winston 200-260 AH Wide|
|E||$12.99||M14/M16||5/8"||240 mm||HiPower 160-300 AH, CALB/TS 300-700 AH|
|F||$12.75||M12 Nuts||1/2"||145 mm||HiPower 20AH-50AH|